RSD Zoning in District of North Vancouver - Single-Family Residential Delbrook Zone
Tracked amendment June 2024: Single-family zones gained a suite and coach-house option. District of North Vancouver Rezoning Bylaw 8698. See District of North Vancouver zoning changes
RSD: Single-Family Residential Delbrook Zone is a residential zoning district in the District of North Vancouver. Establish development regulations to maintain the single-family character of all properties zoned RSD, as identified on Map 505.
On a typical RSD-zoned lot you can expect up to 3 dwelling units, an FSR of about 0.43, a hard cap of 465 m² of floor area however large the lot, a maximum height of 7.92 m, and site coverage up to 35%. Exact figures vary with lot size, frontage, and form of development, so look up your specific address to confirm.
Intent of the RSD district
Establish development regulations to maintain the single-family character of all properties zoned RSD, as identified on Map 505.
RSD at a glance
| Max dwelling units | 3 |
|---|---|
| Floor space ratio (FSR) | 0.43 |
| Max height | 7.92 m |
| Site coverage | 35% |
| Zone category | Residential |
Density tiers in RSD
| Tier | Min lot area | Max units | Base FSR | Bonus FSR | Max height |
|---|---|---|---|---|---|
| Single-Family Residential Delbrook Zone | 743 m² | 3 | 0.43 | - | 7.92 m |
Permitted uses in RSD
- One single-family residential building
RSD zoning FAQ
What is RSD zoning in District of North Vancouver?
RSD (Single-Family Residential Delbrook Zone) is a residential zoning district in the District of North Vancouver. Establish development regulations to maintain the single-family character of all properties zoned RSD, as identified on Map 505.
What can you build on RSD-zoned land in District of North Vancouver?
Permitted uses in RSD include One single-family residential building. Permitted uses are allowed outright; conditional uses may require Development Permit Board approval.
What is the FSR for RSD in District of North Vancouver?
Floor Space Ratio (FSR) in RSD is about 0.43. The ratio is not the whole rule here: floor area is no more than 465 m², so on many lots the absolute figure governs rather than the ratio. ZoneScout calculates the maximum buildable floor area for your specific lot.
How tall can a building be in RSD?
RSD permits a maximum building height of 7.92 m. Height can be affected by view corridors, setbacks, and the specific form of development.
How many units are allowed in RSD zoning?
RSD allows up to 3 dwelling units on an eligible lot. Under the Province's Bill 44 Small-Scale Multi-Unit Housing rules, most standard residential lots in District of North Vancouver now permit multiple units outright. The exact number depends on lot size and whether rental tenure is secured.
Other residential zones in District of North Vancouver
- R1 - Rural and Suburban Detached Residential Zone
- R2 - Urban Detached Residential Zone
- RH1 - High-Rise Residential Zone 1
- RH2 - High-Rise Residential Zone 2
- RH3 - High-Rise Residential Zone 3
- RL1 - Low-Rise Residential Zone 1
- RL2 - Low-Rise Residential Zone 2
- RL3 - Low-Rise Residential Zone 3
Look up a specific address in District of North Vancouver
Source: official District of North Vancouver zoning bylaw (PDF) · updated October 2026