RSQ Zoning in District of North Vancouver - Single-Family Residential Queensdale Zone
Tracked amendment June 2024: Single-family zones gained a suite and coach-house option. District of North Vancouver Rezoning Bylaw 8698. See District of North Vancouver zoning changes
RSQ: Single-Family Residential Queensdale Zone is a residential zoning district in the District of North Vancouver. Establish development regulations to maintain the single-family character of all properties zoned RSQ, as identified on Map 516.
On a typical RSQ-zoned lot you can expect up to 3 dwelling units, an FSR of about 0.45, but never less than 204.4 m² of floor area, a hard cap of 551.83 m² of floor area however large the lot, a maximum height of 9.75 m, and site coverage up to 40%. Exact figures vary with lot size, frontage, and form of development, so look up your specific address to confirm.
Intent of the RSQ district
Establish development regulations to maintain the single-family character of all properties zoned RSQ, as identified on Map 516.
RSQ at a glance
| Max dwelling units | 3 |
|---|---|
| Floor space ratio (FSR) | 0.45 |
| Max height | 9.75 m |
| Site coverage | 40% |
| Zone category | Residential |
Density tiers in RSQ
| Tier | Min lot area | Max units | Base FSR | Bonus FSR | Max height |
|---|---|---|---|---|---|
| Single-Family Residential Queensdale Zone | - | 3 | 0.45 | - | 9.75 m |
Permitted uses in RSQ
- One single-family residential building
RSQ zoning FAQ
What is RSQ zoning in District of North Vancouver?
RSQ (Single-Family Residential Queensdale Zone) is a residential zoning district in the District of North Vancouver. Establish development regulations to maintain the single-family character of all properties zoned RSQ, as identified on Map 516.
What can you build on RSQ-zoned land in District of North Vancouver?
Permitted uses in RSQ include One single-family residential building. Permitted uses are allowed outright; conditional uses may require Development Permit Board approval.
What is the FSR for RSQ in District of North Vancouver?
Floor Space Ratio (FSR) in RSQ is about 0.45. The ratio is not the whole rule here: floor area is at least 204.4 m² and no more than 551.83 m², so on many lots the absolute figure governs rather than the ratio. ZoneScout calculates the maximum buildable floor area for your specific lot.
How tall can a building be in RSQ?
RSQ permits a maximum building height of 9.75 m. Height can be affected by view corridors, setbacks, and the specific form of development.
How many units are allowed in RSQ zoning?
RSQ allows up to 3 dwelling units on an eligible lot. Under the Province's Bill 44 Small-Scale Multi-Unit Housing rules, most standard residential lots in District of North Vancouver now permit multiple units outright. The exact number depends on lot size and whether rental tenure is secured.
Other residential zones in District of North Vancouver
- R1 - Rural and Suburban Detached Residential Zone
- R2 - Urban Detached Residential Zone
- RH1 - High-Rise Residential Zone 1
- RH2 - High-Rise Residential Zone 2
- RH3 - High-Rise Residential Zone 3
- RL1 - Low-Rise Residential Zone 1
- RL2 - Low-Rise Residential Zone 2
- RL3 - Low-Rise Residential Zone 3
Look up a specific address in District of North Vancouver
Source: official District of North Vancouver zoning bylaw (PDF) · updated October 2026