RM-6 Zoning in Maple Ridge — Town Centre High Density Apartment Residential
RM-6: Town Centre High Density Apartment Residential is a residential zoning district in the City of Maple Ridge. This Zone provides for high Density Apartment Residential Use in the Town Centre Area identified on Schedule C, with a minimum Building Height of ten Storeys (s.622.1.1).
On a typical RM-6-zoned lot you can expect an FSR of about 1.6 and a maximum height of 73 m. Exact figures vary with lot size, frontage, and form of development, so look up your specific address to confirm.
Intent of the RM-6 district
This Zone provides for high Density Apartment Residential Use in the Town Centre Area identified on Schedule C, with a minimum Building Height of ten Storeys (s.622.1.1).
RM-6 at a glance
| Floor space ratio (FSR) | 1.6 |
|---|---|
| Max height | 73 m |
| Zone category | Residential |
Density tiers in RM-6
| Tier | Min lot area | Max units | FSR | Max height |
|---|---|---|---|---|
| Town Centre High Density Apartment Residential | 2000 m² | — | 0.5 | 73 m |
| Town Centre High Density Apartment Residential | 2000 m² | — | 0.5 | 73 m |
Permitted uses in RM-6
- Apartment Residential
RM-6 zoning FAQ
What is RM-6 zoning in Maple Ridge?
RM-6 (Town Centre High Density Apartment Residential) is a residential zoning district in the City of Maple Ridge. This Zone provides for high Density Apartment Residential Use in the Town Centre Area identified on Schedule C, with a minimum Building Height of ten Storeys (s.622.1.1).
What can you build on RM-6-zoned land in Maple Ridge?
Permitted uses in RM-6 include Apartment Residential. Permitted uses are allowed outright; conditional uses may require Development Permit Board approval.
What is the FSR for RM-6 in Maple Ridge?
Floor Space Ratio (FSR) in RM-6 is about 1.6. ZoneScout calculates the maximum buildable floor area for your specific lot.
How tall can a building be in RM-6?
RM-6 permits a maximum building height of 73 m. Height can be affected by view corridors, setbacks, and the specific form of development.
Other residential zones in Maple Ridge
- R-1 — Single Detached (Low Density) Urban Residential
- R-2 — Single Detached (Medium Density) Urban Residential
- R-3 — Single Detached (Intensive) Urban Residential
- R-4 — Single Detached (Infill) Urban Residential
- RE — Elderly Citizens Residential
- RG — Cluster Housing Residential
- RG-2 — Suburban Residential Strata
- RM-1 — Low Density Townhouse Residential
Look up a specific address in Maple Ridge
Source: official Maple Ridge zoning bylaw (PDF) · updated August 2026