R5-2 Zoning in Vancouver — Residential High-Rise Apartment (Rental)

R5-2 — Residential High-Rise Apartment (Rental) is a residential zoning district in the City of Vancouver. The intent of this districts schedule, which contains the regulations for the R5-1, R5-2, R5-3 and R5-4 districts, is to encourage high-rise apartments and mixed-use residential buildings of varied tenures, while also preserving lower density options.

On a typical R5-2-zoned lot you can expect an FSR of roughly 1.45–5.8 and a maximum height of 69 m. The upper end of the density range is a bonus that is unlocked only where secured rental or below-market housing is provided. Exact figures vary with lot size, frontage, and form of development — look up your specific address to confirm.

Intent of the R5-2 district

The intent of this districts schedule, which contains the regulations for the R5-1, R5-2, R5-3 and R5-4 districts, is to encourage high-rise apartments and mixed-use residential buildings of varied tenures, while also preserving lower density options.

R5-2 at a glance

Floor space ratio (FSR)1.45–5.8
Max height69 m
Zone categoryResidential

Density tiers in R5-2

TierMin lot areaMax unitsFSRMax height
Residential High-Rise Apartment (Rental)1532 m²5.869 m
Residential High-Rise Apartment (Rental) (low-rise tier)920 m²2.723 m
Residential High-Rise Apartment (Rental) (low-rise tier)613 m²2.223 m
Residential High-Rise Apartment (Rental) (low-rise tier)460 m²1.623 m
Residential High-Rise Apartment (Rental) (low-rise tier) (Other Uses)1.4511.5 m

Permitted uses in R5-2

R5-2 zoning FAQ

What is R5-2 zoning in Vancouver?

R5-2 (Residential High-Rise Apartment (Rental)) is a residential zoning district in the City of Vancouver. The intent of this districts schedule, which contains the regulations for the R5-1, R5-2, R5-3 and R5-4 districts, is to encourage high-rise apartments and mixed-use residential buildings of varied tenures, while also preserving lower density options.

What can you build on R5-2-zoned land in Vancouver?

Permitted uses in R5-2 include High-Rise Apartment, High-Rise Mixed-Use Residential Building, Mid-Rise Apartment, Mid-Rise Mixed-Use Residential Building, Low-Rise Apartment, among others. Permitted uses are allowed outright; conditional uses may require Development Permit Board approval.

What is the FSR for R5-2 in Vancouver?

Floor Space Ratio (FSR) in R5-2 generally ranges from about 1.45 up to 5.8. The higher figure is a density bonus tied to securing rental or below-market housing. ZoneScout calculates the maximum buildable floor area for your specific lot.

How tall can a building be in R5-2?

R5-2 permits a maximum building height of 69 m. Height can be affected by view corridors, setbacks, and the specific form of development.

Other residential zones in Vancouver

Look up a specific address in Vancouver

Source: official Vancouver zoning bylaw (PDF) · updated August 2026